SV3 Air – Up to 25m²
The Solarventi SV3 is the smallest model and is delivered complete with accessories for mounting on a wall.
The amount of hot air from the small models, does not exceed levels for temperature and m3 that makes thermostat/regulator unit necessary.
That is why SV3 are delivered only with on/off switch.
The panel filter is maintenance free.
Find Your Dealer To Buy
SV7 Air – Up to 50m²
The SolarVenti SV7 is usually for rooms up to 50 m².
SolarVenti SV7 is – jointly with it’s bigger brother SV14 – one of our ‘most sold models’.
It’s size and dimensions makes it easy to find a horizontal or vertical placement for this panel in almost any building context.
Solarventi SV7 comes complete with accessories and kit ready for mounting on a wall. Roof mounting kits can be purchased.
There are three SV7 roof versions:
- With complete kit for the Fiber Cement (Type1)
- With complete mounting kit for roofs with steel, roofing felt, bitumen and Decra. (Type2)
- With complete mounting kit for tiling with bricks, cement bricks (contains roof anchors) (Type3)
The Panel filter is maintenance-free.
.
Find Your Dealer To Buy
SV14 Air – Up to 80m²
SolarVenti SV14 is the ‘Most sold model’ jointly with it’s smaller brother SV7. Even though SV 14 delivers approx. 60 – 110 m3 air pr. hour with approx. 25-30 degrees C. temperature rise – compared to air temperature outdoors – the model is still so small, that it typically can be mounted both horizontally or vertically.
There are three SV14 roof versions:
- With complete kit for the Fiber Cement (Type1)
- With complete mounting kit for roofs with steel, roofing felt, bitumen and Decra. (Type2)
- With complete mounting kit for tiling with bricks, cement bricks (contains roof anchors) (Type3)
The Panel filter is maintenance-free.
.
Find Your Dealer To Buy
SV20 Air – Up to 100m²
The SolarVenti SV20 air collector for 100 m2 space and may be mounted horizontal on the roof or wall – or vertical on the wall. It heats ca. 80-140 m3 in blown air per hour up to 30K at full solar radiation.
Solarventi SV20 comes complete with accessories and kit ready for mounting on a wall.
There are three SV20 roof versions:
- With complete kit for the Fiber Cement (Type1)
- With complete mounting kit for roofs with steel, roofing felt, bitumen and Decra. (Type2)
- With complete mounting kit for tiling with bricks, cement bricks (contains roof anchors) (Type3)
The Panel filter is maintenance-free.
.
Find Your Dealer To Buy
SV30 Air – Up to 150m²
SolarVenti SV30 air collector is for 150 m2 of space and may be mounted horizontal on the roof or wall – or vertical on the wall. It heats ca. 150 m3 in blown air per hour up to 40K at full solar radiation.
This collector may be delivered with an inline fan for 33% air flow.
There are three SV30 roof versions:
- With complete kit for the Fiber Cement (Type1)
- With complete mounting kit for roofs with steel, roofing felt, bitumen and Decra. (Type2)
- With complete mounting kit for tiling with bricks, cement bricks (contains roof anchors) (Type3)
The Panel filter is maintenance-free.
.
Find Your Dealer To Buy
Mounting for Roof SV7/SV14
There are three SV7 / SV14 roof versions:
- With complete kit for the Fiber Cement (Type1)
- With complete mounting kit for roofs with steel, roofing felt, bitumen and Decra. (Type2)
- With complete mounting kit for tiling with bricks, cement bricks (contains roof anchors) (Type3)
Roof mounting kit for installation on roofs. Gives the optimal angle to the sun at 50-65 °.
The kit contains the necessary components (fittings, aluflex tube 175 cm in Ø125, feeder and accessories) to attach and install the SolarVenti on a roof.
.
Find Your Dealer To Buy
Mounting for Roof SV20/SV30
There are three SV20 / SV30 roof versions:
- With complete kit for the Fiber Cement (Type1)
- With complete mounting kit for roofs with steel, roofing felt, bitumen and Decra. (Type2)
- With complete mounting kit for tiling with bricks, cement bricks (contains roof anchors) (Type3)
Roof mounting kit for installation on roofs. Gives the optimal angle to the sun at 50-65 °.
The kit contains the necessary components (fittings, aluflex tube 175 cm in Ø125, feeder and accessories) to attach and install the SolarVenti on a roof.
.
Find Your Dealer To Buy
Regulator1
Regulator1 – Plastic
Type: SV Regulator unit for operation of solar cell
incl. on/off switch, regulator, and thermostat
Material: Alu eloxated Nature/Black plastic
.
Find Your Dealer To Buy
SControl
SControl is an advanced system management suitable for temperature, moisture and time management.
When connected to the power grid, it is able to provide a regular humidified ventilation even when the sun is not shining.
The controller requires at least connection to an air collector and temperature sensor in the air collector.
The system is available in the following variants:
SControl set 1 – Control, solar sensor PT1000
.
SControl set 2 – Control, solar sensor PT1000, 12V power supply
.
SControl set 2CC – for cooling
.
SControl set 3 (for cellular systems) – Control, solar sensor PT1000, 12V power supply, combi cooler
.
SControl set 4 – Control, solar sensor PT1000, 12V power supply, 2 pcs. Combination sensor
.
SControl set 5 – Control, solar sensor PT1000, 12V power supply, 2 pcs. Combi fan, room sensor (temp.)
Humidity stop ø125
Description:
Patent app. ”Humidity stop”, which also function as a counter valve.
Besides beeing less expencive than a traditional counter valve you get more advantages:
- Prevents flow of air from the house back into the collector
- Decreases wind draft from outside (from the collector when it is not in operation )
- Humidity Stop makes no noise
- Prevents condensation dripping from the valve if there are pipes on a cold loft
- Prevents intake of dust during a building process
- Made of stainless spring steel. The material is extremely strong, heat resistant and flexible
The Humidity stop is now standard in all SolarVenti systems.